# Key Steps Of Custom Tile Flooring

- Link: https://comsac.com/home-family/key-steps-of-custom-tile-flooring
- Published: 2016-03-23T21:01:02-06:00
- Author: Ainsley G. Zaveri

Tiling your living room, bathroom, or kitchen is a part of home renovation project
that gives your home a customized look that addresses your tastes and preference.
Tiles have ability to improve the market value of your home. However, it will depend
on the type of flooring material that is selected. The materials may range from 
wood laminate, carpet, or tile floors. These materials have their pros and cons.
Therefore, it is important to choose one that addresses your needs. The procedure
of custom tile flooring may seem to be a difficult task especially when you are 
doing it yourself. Nevertheless, with research and guidance from an expert you can
do it successfully.

Whether you are tiling your kitchen, bathroom, or living, you should make a point
of cleaning it and making it ready for the fitting process. The dilapidated cement
backer board as well as old tiles must be removed. Fresh cement backer board must
be fitted. To prevent the backer board from being damaged by water, you should use
either a brush or a roller to create a waterproof membrane.

New tiles should be installed when the floor is clean and dry. Before purchasing
the flooring material, you should measure the dimensions and calculate the size 
and number of material that you need during the tiling process. Ensure you purchase
an excess of ten percent of the material to replace those that are likely to be 
damage during the installation process. You can consult an expert during the installation
process.

The installation process must be started at the floor, if you are aiming at tiling
both the wall and the floor. During this tiling procedure, you will need to cut 
the material to fit the recommended design. You will need to mark the starting point
by installing a level board that begins from the right bottom corner and ends at
the right top corner.

Choose a thin-set mortar appropriate for your material and prepare it using a mixing
paddle and a drill. The preparation procedure is indicated on the package. Make 
sure the mixture has acquired the creamy peanut butter consistency. Afterward, spread
the thin-set in the place you are intending to lay the tiles.

Your room will appear stunning when tiles are uniformly layered. Therefore, you 
must have a point of reference during the installation process. Materials that are
larger than the available space should be trimmed.

Grouting is finishing step that ensure the tiles have achieved a stunning appearance.
However, before grouting, the tiles must have achieved a perfect fit on the floor.
The procedure of preparing the grout is available on the package.

Ainsley G. Zaveri is a flooring specialist who helps individual homeowners make 
the best choices in getting their home flooring done economically. If you are interested
in learning more about [Custom Tile Flooring](http://kmfloorsinc.com/) he recommends
you check out [kmfloorsinc.com](http://kmfloorsinc.com/).